Office: _PH_:1-780-414-1445_ FAX: 780-414-1446 Email: altachemltd@gmail.com
Technical Assistance: 1-780-907-2357 Email: ...altachem@gmail.com altachem@shaw.ca
Office: _PH_:1-780-414-1445_ FAX: 780-414-1446 Email: altachemltd@gmail.com
Stick Name & Description
Many Other Sizes Can Be Manufactured to Your Specifications
Stock Part No. & Sizes
Edmonton
Manufactured Sizes
2-3 weeks Delivery
CORROSION INHIBITOR STICK “ A “ (Corrosion Inhibition Type A (Oil)
SDS Sheet Contact
COR-FOAM (FOAMER/CORROSION} STICKS are a unique chemical stick that contains 100% active ingredints that protect wells from corrosion and produce high amounts of foam. This product is contained in a water soluble tube with soluble caps.
ACL-6050
1 1/4 X 15
CORROSION INH. STICKS”(Corrosion Inh. Type “B” Iron Oxides-SRB’s))
SDS Sheet Contact
ACL-6120
3/4 X 15
ACL-6150
1 1/4 x 15
ACL-6190
1 5/8 x 18
TANK STICK
Non Stock at Present
CORROSION INH. PELLETS (Corrosion Inh. Type “B” Iron Oxides-SRB’s))
SDS Sheet Contact
Corrosion Inhibitor Pellets are water soluble pellets designed to release corrosion inhibitor. Surface active which aids in solids removal & control, while helping to eliminate the breeding grounds for micro organisms. Contains Ammonium Quaternary Salt in pellet form. Used in water injection systems, gas wells, cooling towers etc. Specific gravity of 1.15 to 1.25. Pellets will fall readily in brine solutions. Typical treatment of 30 PPM of 4200 U.S. gal. of water would require 1.05 lbs of CIP-25 pellets.
AC-6100
5/16″–Non Stock
CORROSION INH. TANK BALLS (Corrosion Inh. “B” Iron Oxides-SRB’s))
SDS Sheet Contact
CORROSION INH. BALLS TYPE B BALLS are primarily recommended for use to control corrosion and aid in solids removal and control. This in turn will help reduce the breeding grounds for micro-organisms in water injection systems, such as tanks, wells, and flow lines by virtually eliminating sludge build up. The CORROSION INH. Type “B” BALLS may also be used to treat water injection systems, dead areas such as rat-hole, annulus space above the packer, and the bottom of the water supply tanks, as well as treating water build up in oil storage tanks.
ACL-6105
Tank Balls
4″–Non Stock
CORROSION INHIBITOR STICK “ C “(Corrosion Inhibition Type “C”)
SDS Sheet Contact
CORROSION INHIBITOR STICKS™ Type “D” are primarily used to control corrosion in water injection systems (tanks, wells, and lines) and down hole applications. CORROSION INHIBITOR STICKS™ Type “D” can be used to treat certain hard-to-reach areas in water injection systems. Dead areas such as in the rat-hole, annulus space above the packer, and the bottom of the water supply tanks may be reached and more easily treated with CORROSION INHIBITOR STICKS™ Type “D”can be used to control corrosion in oil wells, gas wells and cooling towers.
AC-6250
1 1/4 x 15
CORROSION INHIBITOR STICK “ D “(Corrosion Inhibition Type “D”
SDS Sheet Contact
CORROSION INHIBITOR STICKS™ Type “D” are primarily used to control corrosion in water injection systems (tanks, wells, and lines) and down hole applications. CORROSION INHIBITOR STICKS™ Type “D” can be used to treat certain hard-to-reach areas in water injection systems. Dead areas such as in the rat-hole, annulus space above the packer, and the bottom of the water supply tanks may be reached and more easily treated with CORROSION INHIBITOR STICKS™ Type “D”can be used to control corrosion in oil wells, gas wells and cooling towers.
AC-6390
1 5/8 x 18
LINKS
ACL-6105
4″–Non Stock