Office: _PH_:1-780-414-1445_ FAX: 780-414-1446 Email: altachemltd@gmail.com
Technical Assistance: 1-780-907-2357 Email: ...altachem@gmail.com altachem@shaw.ca
Office: _PH_:1-780-414-1445_ FAX: 780-414-1446 Email: altachemltd@gmail.com
Stick Name & Description
Many Other Sizes Can Be Manufactured to Your Specifications
Stock Part No. & Sizes
Stock Edmonton
Manufactured Sizes
2-3 weeks Delivery
ACID STICKS (Regulated) (30% Active)
The ACID BALL is a water-soluble ball that is a combination of acid, surfactant, dispersing agent and iron sequester that remove carbonate scale and rust deposits in oilfield tanks.The BALL is dropped through the hatch of the tank. The specific gravity of the ACID BALL has also been used in pipelines containing fluid and debris. These can be used as a soluble pipeline pig in pipelines where water is present to allow them to dissolve releasing the acid contained in the ball.
AC-2o95
1 5/8 x 18
ACID BALLS (Regulated) (30% Active)
SDS SheetContact
The CLEAN-UP BALL is a water soluble sphere shaped solid chemical solution which is used to treat the water in oil tanks with water bottoms, produced water tanks and oilfield water holding containers. They are composed of Ammonium Quaternary Salts and surfactants which are especially effective in preventing CO2 and Hydrogen Sulfide corrosion caused by sulfide reducing bacteria.
AC-6305
4″–Non Stock
CORROSION INHIBITOR STICKS Type “B”(Corrosion Inhibitor Type “B” Iron Oxides-SRB’s)
SDS SheetContact
CORROSION INH. STICKS TYPE B are water soluble sticks designed to release corrosion inhibitor and control corrosion from various sources. Type B Corrosion Inh. Sticks contain Amine Salt in stick form.Corrosion Inhibitor Sticks Type B are effective in preventing Hydrogen Sulfide corrosion caused by sulfide reducing bacteria. The result of effective treatment will be reduced corrosion rates, a reduction in iron counts and iron sulfide deposits.
AC-6195
1 5/8 x 18–Non Stock
CORROSION INHIBITOR BALLS Type “B” (Corrosion Inhibitor Type “B” Iron Oxides-SRB’s)
SDS Sheet Contact
CORROSION INH. BALLS TYPE B BALLS are primarily recommended for use to control corrosion and aid in solids removal and control. This in turn will help reduce the breeding grounds for micro-organisms in water injection systems, such as tanks, wells, and flow lines by virtually eliminating sludge build up. The CORROSION INH. Type “B” BALLS may also be used to treat water injection systems, dead areas such as rat-hole, annulus space above the packer, and the bottom of the water supply tanks, as well as treating water build up in oil storage tanks.
AC-6105
4″–Non Stock
CORROSION INHIBITOR STICK TYPE “ D “(Corrosion Inhibition Type “D”
SDS Sheet Contact
CORROSION INHIBITOR STICKS™ Type “D” are primarily used to control corrosion in water injection systems (tanks, wells, and lines) and down hole applications. CORROSION INHIBITOR STICKS™ Type “D” can be used to treat certain hard-to-reach areas in water injection systems. Dead areas such as in the rat-hole, annulus space above the packer, and the bottom of the water supply tanks may be reached and more easily treated with CORROSION INHIBITOR STICKS™ Type “D”can be used to control corrosion in oil wells, gas wells and cooling towers.
AC-6395
1 5/8 x 18–Non Stock
CORROSION INHIBITOR Ball TYPE “ D “(Corrosion Inhibition Type “D”) (Clean-Up Ball)
SDS Sheet Contact
CORROSION INHIBITOR BALL TYPE “ D “ is a water soluble sphere shaped solid chemical solution which is used to treat the water in oil tanks with water bottoms, produced water tanks and oilfield water holding containers. They are composed of Ammonium Quaternary Salts and surfactants which are especially effective in preventing CO2 and Hydrogen Sulfide corrosion caused by sulfide reducing bacteria.
AC-6305
4″–Non Stock
The DEFOAMER STICK is a silicone free defoamer in stick form designed to work in water-based fluids while also addressing foaming issues experienced in the production process. It is made up of a mixture of foam destroying polymers with hydrophobic solids. Virtually all water-based fluids contains additives that contribute foaming challenges found in the drilling process, the DEFOAMER STICK can be used to effectually avoid and/or destroy the formation of foam at the source.
AC-0550
1 1/4 x 15
PARAFFIN INHIBITOR STICKS (Paraffin Inhibition (Oil)
SDS Sheet Contact
PARAFFIN INHIBITOR STICKS are Oil-soluble stick that release paraffin inhibitor to help reduce paraffin deposition from crude oil in production systems. PARAFFIN INHIBITOR STICKS contain a combination of micro-crystalline wax & special crystal modifiers. These ingredients contribute to an effective inhibiting process on certain ranges of molecular weight paraffin’s.
AC-7095
1 5/8 x 18–Non Stock
The PARAFFIN INHIBITOR BALLS are Oil-soluble stick that release paraffin inhibitor to help reduce paraffin deposition from crude oil in production systems. The PARAFFIN INHIBITOR BALLS contains a combination of micro-crystalline wax & special crystal modifiers. These ingredients contribute to an effective inhibiting process on certain ranges of molecular weight paraffin’s.
AC-7005
4′–Non Stock
AC-5250
1 1/4 x 15
In many Gas wells the water that enters the well bore contains various amounts of salts (sodium chloride and other salts) dissolved in the water. Often, as the fluid moves up the casing or tubing, these dissolved salts will precipitate out and reduce the opening in the pipe and in some instance totally plug the pipe. The Red Sea alt Sticks will help keep the salt in solution by chleating action.
AC-1195
1 5/8 x 18–Non Stock
SCALE INHIBITOR STICK (Scale)
SDS Sheet Contact
Scale Inhibitor Sticks contain chemicals that help prevent carbonate types of scale from depositing downhole in oil and gas wells, casing, tubing, and flow lines. It is also very useful to include Acid Sticks in this type of treatment since Acid Sticks will remove carbonate types of scale after being deposited, also neutralizing scale in solution
AC-6595
1 5/8 x 18
THPS Stick is a water soluble iron sulfide dissolver in solid stick form. THPS Sticks are recommended for control of iron in oilfield water as well as petrochemical and other industrial waters. THPS Sticks may be dropped down the tubing and allowed to fall to the rathole. Benefits have also been seen by treating oil/water tanks with THPS Stick. Excellent Tank Stick.
AC-TH50 – Wells
1 1/4 x 15
AC-TH95 – Tanks
1 5/8 x 18–Non Stock
THPS Balls are water soluble iron sulfide dissolver in solid Ball form. THPS Balls are recommended for control of iron in oilfield water as well as petrochemical and other industrial waters. THPS Balls may be dropped down the tubing and allowed to fall to the rathole. Benefits have also been seen by treating oil/water tanks with THPS Balls. Excellent Tank Ball.
AC-THPS
4″–Non Stock
AC-8150
1 1/4 x 15
THPS Pellets are water soluble iron sulfide dissolver in solid Ball form. THPS Pellets are recommended for control of iron in oilfield water as well as petrochemical and other industrial waters. THPS Pellets may be dropped down the tubing and allowed to fall to the rathole. Benefits have also been seen by treating oil/water tanks with THPS Pellets. Excellent for Wells & Tanksk.
AC-THPS
5/16″–Non Stock
LINKS
