|
CITRASOLVE
Industrial Degreaser
CITRASOLVE is a very concentrated, heavy duty citrus based solvent degreaser for cleaning shop floors, heavy equipment and parts. This unique blend of surfactants and organic solvents eliminates the toxicity and odor problem commonly associated with petroleum and chlorinated based products. It is designed to effectively and efficiently remove oil, grease, tar, asphalt, dirt, etc, from a wide variety of surfaces.(505)
|
CITRASOLVE
Directions For Use
Apply this product to the surface with a low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. If available, rinse surface with a high pressure washer or hot steam system. Use in well ventilated areas.(505)
|
PART NO.
AC-CS-20 -- 20 Litre Pail
AC-CS-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
|
DESOLVE
Gum & Tar Remover
CFIA Approved. This extremely concentrated, heavy duty, citrus based solvent cleaner is designed for removing gum and tar from hard surfaces and many kinds of fabrics. For specific use in food plants, see directions.(551)
|
DESOLVE
Directions For Use
Apply product directly onto spot, agitating if necessary. Rinse thoroughly after use. Always test in an inconspicuous area for compatibility. Food contact surfaces must be rinsed with potable water before reuse.
|
PART NO.
AC-DS-20 -- 20 Litre Pail
AC-DS-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
|
GENSOLVE
High Flashpoint Degreaser
GENSOLVE is a high flashpoint solvent based degreaser. It is designed to be used in enclosed areas where there is a high risk of fire. Based on a blend of synthetic hydrocarbons and citrus oils, Gensolve will dissolve tough oil deposits such as bitumen, grease and heavy crude.
|
GENSOLVE
Directions For Use
Apply product to surface by low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. It is recommended that the surface then be rinsed with a high pressure washer or hot steam pressure system. Use in well ventilated areas.
|
PART NO.
AC-GS-20 -- 20 Litre Pail
AC-GS-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
|
INTENSE
Industrial Degreaser
This product is a heavy duty citrus based solvent degreaser for cleaning bitumen off of shop floors, heavy equipment, and parts. This unique blend of surfactants and terpene solvents is widely used in the oil industry for the removal of crude oil, bitumen and other soils from pumps, process equipment, gauges and service equipment. (920)
|
INTENSE
Directions For Use
Apply this product to the surface with a low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. If available, rinse surface with a high pressure washer or hot steam system. Use in well ventilated areas.(505)
|
PART NO.
AC-IN-20 -- 20 Litre Pail
AC-IN-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
|
KNOCKOUT
Industrial Degreaser
KNOCKOUT is a very concentrated, heavy duty citrus based solvent degreaser for cleaning shop floors, heavy equipment and parts. This unique blend of surfactants and organic solvents eliminates the toxicity and odor problem commonly associated with petroleum and chlorinated based products. It is designed to effectively and efficiently remove oil, grease, tar, asphalt, dirt, etc, from a wide variety of surfaces.(505)
|
KNOCKOUT
Directions For Use
Apply this product to the surface with a low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. If available, rinse surface with a high pressure washer or hot steam system. Use in well ventilated areas.(505)
|
PART NO.
AC-KN-20 -- 20 Litre Pail
AC-KN-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
|
PETROSOLVE
Industrial Degreaser
PETROSOLVE is a highly effective solvent degreaser that removes tar, asphalt and grease buildup. It also incorporates the use of wetting agents which allows it to interface much more readily with the surface being cleaned. This product is a petroleum based degreaser and is used extensively in the oilfield to clean wellheads, trucks and work - over equipment.(926)
|
PETROSOLVE
Directions For Use
Apply this product to the surface with a low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. If available, rinse surface with a high pressure washer or hot steam system. Use in well ventilated areas.(505)
|
PART NO.
AC-PT-20 -- 20 Litre Pail
AC-PT-205 -- 205 Gal. Drum
Technical Data Sheet
Download
MSDS DOWNLOAD
(Requires Login)
|
